Aftermarket Slipcases & Traycases

[zelig]

This thread should be focused on anything to do with aftermarket slipcases. To kick things off, there's some interest to have custom cases made by Jeff Whiley for the Doubleday books. We can discuss here.

I'm copying this below as it's relevant:


To give folks an idea of cost, Jeff can get a plate made to pretty much any specification. Cost of the plate is directly related to the size. Anywhere between £8 and £40. Charge for slipcase averages around £13.

Obviously the cost of the plate is a one off as it can be used again and again. A separate plate is required if the spine is to be embossed as well.
Costs could be kept down by having the slipcases just embossed on the spine or just have a generic 'Stephen King' on the front (this plate is already made and would incur no additional cost)
Personally I would like to have each one specific to the book, if we got 10 people to split the plate cost it becomes very reasonable (.80p to £4 each, depending on size)

[zelig]

I wanted to add this as well for a reference point. It's a complete list of all Cemetery Danse aftermarket slipcases and traycases.


Duma Key - 1st Trade HC USA - Link (http://www.cemeterydance.com/page/CDP/PROD/X_CASES034)
Under the Dome - 1st Trade HC USA (Slipcase Black)
Under the Dome - 1st Trade HC USA (Slipcase Blue)
Under the Dome - 1st Trade HC USA (Traycase) - Link for UTD cases (http://www.thedarktower.org/palaver/showthread.php?18900-Aftermarket-Slipcases-amp-Traycases&p=1057457&viewfull=1#post1057457).
Blockade Billy - 1st Trade HC USA - Link (http://www.cemeterydance.com/page/CDP/PROD/X_BBSLIP)
Full Dark No Stars - 1st Trade HC USA (Slipcase)
Full Dark No Stars - 1st Trade HC USA (Traycase) - Link (http://www.thedarktower.org/palaver/showthread.php?8731-Book-Collection-frik-Siep&p=967769&viewfull=1#post967769)
11/22/63 - 1st Trade HC USA (Slipcase) - Link (http://www.cemeterydance.com/extras/limited-edition-slipcase-for-112263-shipping-now/)
11/22/63 - 1st Trade HC USA (Traycase) - Link (http://www.thedarktower.org/palaver/showthread.php?5552-Cemetery-Dance-discussion-thread&p=893185&viewfull=1#post893185)
11/22/63 - 1st Trade HC UK - Link (http://www.cemeterydance.com/extras/112263-trade-hardcover-slipcases-first-photos/)
The Talisman/Black House - Scribner HC reprint set - Link (http://www.cemeterydance.com/extras/the-talisman-black-house-collector/)
The Wind Through The Keyhole - 1st Trade HC USA - Link (http://www.thedarktower.org/palaver/showthread.php?5552-Cemetery-Dance-discussion-thread&p=893185&viewfull=1#post893185)
Doctor Sleep - 1st Trade HC USA - Link (http://www.cemeterydance.com/page/CDP/PROD/x_cases032)
Doctor Sleep - 1st Trade HC UK - Link (http://www.cemeterydance.com/extras/doctor-sleep-by-stephen-king-uk-trade-hardcover/)
Joyland - Paperback - Link (http://www.cemeterydance.com/extras/joyland-by-stephen-king-announced/)
Mr. Mercedes - 1st Trade HC USA - Link (http://www.cemeterydance.com/page/CDP/PROD/x_cases037)
Revival - 1st Trade HC USA - Link (http://www.cemeterydance.com/page/CDP/PROD/x_cases038)
Finders Keepers - 1st Trade HC USA - Link (http://www.cemeterydance.com/page/CDP/PROD/x_cases039)
Joyland Illustrated Edition - 1st Trade HC USA - Link (http://www.cemeterydance.com/images/misc/joylandslipcase.jpg)
The Bazaar of Bad Dreams - 1st Trade HC USA - Link (http://www.cemeterydance.com/images/misc/BadDreamsSlipcase.jpg)
End of Watch
Hearts In Suspension - 1st Trade HC USA - Link (http://www.cemeterydance.com/slipcase-for-hearts-in-suspension.html)
Charlie the Choo Choo - Link (http://www.cemeterydance.com/slipcase-for-charlie-the-choo-choo.html)
Sleeping Beauties - 1st Trade HC USA - Link (http://www.cemeterydance.com/sleeping-beauties-king-slipcase.html)

[webstar1000]

I do not think Jeff can do Traycases:( I asked him once...

[Aronstg]

How much does one of his slipcases cost when you factor in shipping to the USA? Any guesses?

Also does he already have a few premade plates? I wouldn't mind getting some cases for my none SK books also.

[zelig]

The last time I ordered, it was 6 cases and postage was £18.25 to the USA. So if you figure £13 for the slipcase, plus postage divided between the 6, that's £16 each, so around $24 which is pretty good in my opinion. I'd recommend emailing him directly with any other questions you have. I know he has the standard "Stephen King" plates. Here's (http://www.thedarktower.org/palaver/showthread.php?18803-Book-Collection-zelig&p=891801&viewfull=1#post891801) what I recently had done. Just scroll down a little.

His email is: jeffrey.whiley@ntlworld.com

[Stockerlone]

Jeff build my first slipcases 3 years ago...

STORIES S/L
http://www.thedarktower.org/gallery/data/742/medium/PICT4304.JPG

5 German SK HC´s
http://www.thedarktower.org/gallery/data/742/medium/PICT4314.JPG

[stroppygoblin]

Here are some more examples of plates he has already:

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010437_zpsebf413db.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010437_zpsebf413db.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010092_zps61c6b138.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010092_zps61c6b138.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010434_zpse4d2be4f.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010434_zpse4d2be4f.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010454_zps815d25f3.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010454_zps815d25f3.jpg.html)

[zelig]

Really nice... love 'em...

[Merlin1958]

Very Nice!!!

[burial]

I love these...
I would love to take a part in next order of slipcases with someone...

[stroppygoblin]

I love these...
I would love to take a part in next order of slipcases with someone...

OK - lets get the ball rolling on this....

I have 3 separate slipcase projects I am intending to pursue with Jeff.

1. A slipcase for Dolan's Cadillac S/L (I already have Merlin1958 signed up for one of these)
2. A slipcase to hold all the Castle Rock Newsletters (This has not been mentioned before - anyone else interested?)
3. A set of DoubleDay slipcases. (This one has the most feedback)

For (1) I intend it to be just a stamp on the front (Nothing on the spine as the book already has the spine info). I'd like it to be a picture of the car with "DOLAN'S CADILLAC" above it
http://www.stephenkingcollector.com/pictures/limiteds-sigsheet/Dolan_s_Cadillac_SL_sig1.JPG
Obviously the picture would be far less detailed as it will be just the basic car outline block filled.

For(2) I intend it to be just a stamp on the spine (Nothing on the front) This will be the Castle Rock logo printed vertically and something like "The Stephen King Newsletter Vol 1 - 5"
http://club-stephenking.fr/img/APROPOS/newsletter/castle-rock-newsletter/CastleRock-title.jpg

Now for (3) I am open to suggestions. I'd like something that ties the books together but I cant decide whether the slipcases would be facing in or out on my shelf... I'd also like to have the Book name done in the original font but that's going to mean 1 plate per book (as opposed to something like "Stephen King - The DoubleDay Years" which could be used for all 5 (or even 6 books if you include Pet Semetary)

What does everyone else think - I'd love to see some ideas. Something like these (although slipcase rather than traycase) would be really cool...

http://www.tbclrarebooks.com/pictures/medium/26800.jpg

http://www.tbclrarebooks.com/pictures/32409.jpg

http://www.tbclrarebooks.com/pictures/32143.jpg

http://www.tbclrarebooks.com/pictures/32123.jpg

http://www.tbclrarebooks.com/pictures/31467.jpg

http://i938.photobucket.com/albums/ad223/stroppygoblin/ScreenShot2015-01-06at104842AM_zpsbe00604a.png~original (http://s938.photobucket.com/user/stroppygoblin/media/ScreenShot2015-01-06at104842AM_zpsbe00604a.png.html)

[webstar1000]

I need a Dolans Simon... so I am in!

[Room 217 Caretaker]

I think you would also have some interest in Justin Cronins S/L The Twelve by Cemetery Dance. A few of us want one.

Mulleins

[Stockerlone]

I think you would also have some interest in Justin Cronins S/L The Twelve by Cemetery Dance. A few of us want one.

Mulleins

I only have slipcases for my other TWELVE books from Jeff...

http://www.thedarktower.org/gallery/data/742/medium/PICT2319.JPG
http://www.thedarktower.org/gallery/data/742/medium/PICT2279.JPG

[zelig]

Hi Simon,

So I'm excited that this is finally getting started after much discussion.

Here's my thoughts:


Dolan's Cadillac: Although I don't have a copy, I'm in for this one because when I do eventually get one, I'll have the slipcase.
Castle Rock Newsletters: Yes for sure! I have a complete set and would love a slipcase for them. And I like how you've described it exactly.
Doubleday years: I'm obviously in with this one because this is what started the discussion originally. Personally, mine will face out, so I don't mind if there's any printing on the spine or not. Although I'd prefer it on the spine as well like in those example images you posted. I also feel we definitely need each book name on the front in the original font. If we're doing this, let's do it right. If we get enough people to 'buy in', the costs won't be too high.


I am happy to help with logistics, like maybe keep track of a list of who is interested in what? Let me know.

[burial]

I'm also in for all of these...

I don't own these books but i'm going to ;)

[Merlin1958]

http://imageshack.com/a/img163/7816/1vvg.jpg


:clap::clap::clap::clap::clap:

[stroppygoblin]

first pass at a Doubleday Slipcase....

http://i938.photobucket.com/albums/ad223/stroppygoblin/Artboard1_zpsaee27576.png~original (http://s938.photobucket.com/user/stroppygoblin/media/Artboard1_zpsaee27576.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/Artboard2_zpsb6da7ca2.png~original (http://s938.photobucket.com/user/stroppygoblin/media/Artboard2_zpsb6da7ca2.png.html)

[Merlin1958]

Now that's sweet. :dance:

[zelig]

Oh yeah! I love it. Did you just design that up? If so, you're in the wrong profession! But I'm sure the one you're in pays more!

[stroppygoblin]

yeah just knocked it up. (Getting the shining font right was a bitch)
I'll do the others over the next day or so - it will give everyone an idea of how they will look stacked together.

[zelig]

Perfect, thanks! This small project is getting more exciting by the minute... Did you want me to keep track of a list of members who are interested in taking part?

[Merlin1958]

Here's another guy who is pretty good and in the U.S. Little more expensive though.

http://slipcasebooks.com/aboutus.htm

[stroppygoblin]

Perfect, thanks! This small project is getting more exciting by the minute... Did you want me to keep track of a list of members who are interested in taking part?

That would be great Paul - Thanks.

[zelig]

Perfect, thanks! This small project is getting more exciting by the minute... Did you want me to keep track of a list of members who are interested in taking part?

That would be great Paul - Thanks.

Okay, will do.

That said, anyone else who wants to be a part of this, please let me know. I'll start to build a list and will double-check again before any orders are placed to make sure we have everyone. Please indicate which slipcase project you are interested in:


Dolan's Cadillac
Castle Rock
Doubleday


Details here (http://www.thedarktower.org/palaver/showthread.php?18900-Aftermarket-Slipcases-amp-Traycases&p=893329&viewfull=1#post893329).

Currently, I have webstar1000 for Dolan's and burial for all 3 so you guys don't need to respond unless you're changing anything.

[Merlin1958]

Simon, do you need front money? If so, its not an issue for me. Just holler!!!

[stroppygoblin]

Simon, do you need front money? If so, its not an issue for me. Just holler!!!

Thanks Bill, but I think we are good at the moment. I'm just looking for numbers of people who are DEFINITELY interested in purchasing these slipcases in order to get an idea of costs. I'll produce (and confirm feasibility with Jeff) mockups for all the cases so everyone knows what they are buying.

[Room 217 Caretaker]

Simon, do you need front money? If so, its not an issue for me. Just holler!!!

Thanks Bill, but I think we are good at the moment. I'm just looking for numbers of people who are DEFINITELY interested in purchasing these slipcases in order to get an idea of costs. I'll produce (and confirm feasibility with Jeff) mockups for all the cases so everyone knows what they are buying.

Wait a minute.....I'm starting to get the big picture here......Bill has a New York address in summer, he's offering to front money, and, when he eats out, he always sits in a corner facing the door. Godfather Bill.

Mulleins

[zelig]

Just to clarify one thing. Right now we're just looking to get confirmed orders for the custom blocking so Simon can work on costing. Of course, the more people who take part, the less the custom blocking will cost each of us. Once we have that squared away, then you'd just place your slipcase orders direct with Jeff.

Right now, here's what I have:

1. Dolan's Cadillac: webstar1000, Bill, Simon, zelig, burial
2. Castle Rock: Simon, zelig, burial
3. Doubleday books: Simon, zelig, burial

Peace out...

:smile:

[stroppygoblin]

http://i2.wp.com/www.thisblogrules.com/wp-content/uploads/2014/09/6.jpg

[Merlin1958]

Simon, do you need front money? If so, its not an issue for me. Just holler!!!

Thanks Bill, but I think we are good at the moment. I'm just looking for numbers of people who are DEFINITELY interested in purchasing these slipcases in order to get an idea of costs. I'll produce (and confirm feasibility with Jeff) mockups for all the cases so everyone knows what they are buying.

Wait a minute.....I'm starting to get the big picture here......Bill has a New York address in summer, he's offering to front money, and, when he eats out, he always sits in a corner facing the door. Godfather Bill.

Mulleins


Don Merlin will do!!! LOL I'm fucking "Magical", fuhgeddiboutit!!!!! Ralph, you take care of that thing? Not the first thing the second thing. LOL

[Jimimck]

I'd be interested in a Doubleday set. That Shining mock up looked great.

[zelig]

I'd be interested in a Doubleday set. That Shining mock up looked great.

Got it. I'll put you on the list. Thanks.

[Roseannebarr]

Just to clarify one thing. Right now we're just looking to get confirmed orders for the custom blocking so Simon can work on costing. Of course, the more people who take part, the less the custom blocking will cost each of us. Once we have that squared away, then you'd just place your slipcase orders direct with Jeff.

Right now, here's what I have:

1. Dolan's Cadillac: webstar1000, Bill, Simon, zelig, burial
2. Castle Rock: Simon, zelig, burial
3. Doubleday books: Simon, zelig, burial

Peace out...

:smile:


I would be interested in all 3. Depending on price.

[zelig]

I would be interested in all 3. Depending on price.

Got it.

[tippy4]

I would be interested in a slipcase for Dolan's Cadillac....depending on price.

[stroppygoblin]

Just heard back from Jeff and he is up for creating these and thinks he may be able to give a discount on the plates depending on the numbers.

One issue he has raised with the Castle Rock plate is our old friend, the copyright laws. Does anyone know if the logo is copyrighted and who I could contact in order to obtain permission?
http://club-stephenking.fr/img/APROPOS/newsletter/castle-rock-newsletter/CastleRock-title.jpg

I suspect we may run into the same issue with the Book titles as well. I *think* I can get round this as I am creating vector copies based on the original rather than using a direct copy of the original itself. They are not 100% identical but close enough not to be noticeable. I am sure I recall Dolso saying this is how he avoids the problem - can anyone confirm this?

[biomieg]

AFAIK the CR Newsletters were an official King thing (not like Beahm's Phantasmagoria) and I think they were edited/published by King's next of kin (a brother of his wife, perhaps). You should probably contact King's office.

[stroppygoblin]

AFAIK the CR Newsletters were an official King thing (not like Beahm's Phantasmagoria) and I think they were edited/published by King's next of kin (a brother of his wife, perhaps). You should probably contact King's office.

Thanks Michaël. Do you (or anyone else) have a contact address other than the email link on the SK.com site?

[stroppygoblin]

Mock up for Carrie and added variant (Jeff can do different coloured slipcases):

http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieSpine_zps47d70bcd.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieSpine_zps47d70bcd.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieFront_zps324d6398.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieFront_zps324d6398.png.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieSpine2_zpsa5d22fff.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieSpine2_zpsa5d22fff.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieFront2_zpsbd76f0f6.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieFront2_zpsbd76f0f6.png.html)

[Merlin1958]

Just heard back from Jeff and he is up for creating these and thinks he may be able to give a discount on the plates depending on the numbers.

One issue he has raised with the Castle Rock plate is our old friend, the copyright laws. Does anyone know if the logo is copyrighted and who I could contact in order to obtain permission?
http://club-stephenking.fr/img/APROPOS/newsletter/castle-rock-newsletter/CastleRock-title.jpg

I suspect we may run into the same issue with the Book titles as well. I *think* I can get round this as I am creating vector copies based on the original rather than using a direct copy of the original itself. They are not 100% identical but close enough not to be noticeable. I am sure I recall Dolso saying this is how he avoids the problem - can anyone confirm this?


Yes. A public font that closely resembles the original does the trick. Go back and note the title for the "Night Shift" cases for an example. Really close, yet a public font.

[stroppygoblin]

Here is the mockup for Dolan's...

http://i938.photobucket.com/albums/ad223/stroppygoblin/DolansFront_zps850f07bc.png~original (http://s938.photobucket.com/user/stroppygoblin/media/DolansFront_zps850f07bc.png.html)

[Merlin1958]

Sweet!!!!

[stroppygoblin]

Yes. A public font that closely resembles the original does the trick. Go back and note the title for the "Night Shift" cases for an example. Really close, yet a public font.

I strongly suspect that because of the nature of the newsletter (Ie home created) this is ACTUALLY a public font - I just need to either find proof of that or better still find the actual font!

[Merlin1958]

Yes. A public font that closely resembles the original does the trick. Go back and note the title for the "Night Shift" cases for an example. Really close, yet a public font.

I strongly suspect that because of the nature of the newsletter (Ie home created) this is ACTUALLY a public font - I just need to either find proof of that or better still find the actual font!

Yeah, the "Castle Rock" will be tough, but the other titles should be simple however, you do need to switch to a public font. Dick, received a letter from SK's lawyers when he used the actual font on an early case.

[zelig]

I would be interested in a slipcase for Dolan's Cadillac....depending on price.

Got it.

[zelig]

Simon, the new artworks look great for both Carrie and Dolan's Cadillac. Quick thought. Do you think the "Doubleday" text should be placed at the bottom of the spine, positioned where you'd usually see the publisher name/logo? Just a thought. It looks great where it is too.

[killjoy72]

Hi all,
Long time lurker, first time poster! Seeing these awesome slipcase designs have tipped the scale for me to finally "officially" join the site. I'm loving where these Doubleday designs are going, so Zelig, please put me down for these as well!

[zelig]

Hi all,
Long time lurker, first time poster! Seeing these awesome slipcase designs have tipped the scale for me to finally "officially" join the site. I'm loving where these Doubleday designs are going, so Zelig, please put me down for these as well!

Welcome killjoy72, and congrats on your first post! So happy to have you here and out of the shadows! I have added you to the list... details/instructions will follow later...

[AKC]

Put me down for 2 Dolans and the Doubledays…..

[Dan]

I would be interested in the Doubleday cases depending on final price shipped to US.

[burial]

Simon, the new artworks look great for both Carrie and Dolan's Cadillac. Quick thought. Do you think the "Doubleday" text should be placed at the bottom of the spine, positioned where you'd usually see the publisher name/logo? Just a thought. It looks great where it is too.

I think so too... this might be a reusable plate (if it is possible - I'm not sure)
no matter what - these looks great! and there are more and more people wanting them

[zelig]

I would be interested in the Doubleday cases depending on final price shipped to US.

Got it.


Put me down for 2 Dolans and the Doubledays…..

Got it.

[dnemec]

I don't actually own Dolan's Cadillac, but I'd probably buy the slipcase as I will eventually buy the book.

Does it mean you have a problem when you buy slipcases for books you don't own yet?! Hmmm...

[zelig]

I don't actually own Dolan's Cadillac, but I'd probably buy the slipcase as I will eventually buy the book.

Does it mean you have a problem when you buy slipcases for books you don't own yet?! Hmmm...

Good one! I have the same problem, so you're not alone. I have had a custom traycase for the Carrie ARC sitting empty on my shelf for about 6 months, and it will likely sit empty for another year or more until I get the ARC.

I'll put you down for the Dolan's.

[stroppygoblin]

Simon, the new artworks look great for both Carrie and Dolan's Cadillac. Quick thought. Do you think the "Doubleday" text should be placed at the bottom of the spine, positioned where you'd usually see the publisher name/logo? Just a thought. It looks great where it is too.

I think so too... this might be a reusable plate (if it is possible - I'm not sure)
no matter what - these looks great! and there are more and more people wanting them

OK, so the entire design has to fit on one plate as I understand it. The price of the plate is directly proportional to the plate size, so if you have a big space between one part of the design and the other this increases the plate size and therefore the cost. Keeping the design together ensures the smallest plate and lowest cost.

Here is the design for the Castle Rock Newsletter case. I have done some digging and according to US law, If I print the font, scan it and then draw around it I am NOT infringing copyright as it is considered new work. This is what I have done in all cases. I am not actually using ANY published fonts but my own drawings (based upon the original).

http://i938.photobucket.com/albums/ad223/stroppygoblin/CastleRock_zpsc4102a3a.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CastleRock_zpsc4102a3a.png.html)

[stroppygoblin]

I realised the spines for Carrie and Shining were not to scale (Carrie is quite a thin book) I have resized based on the actual books.

http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieSpine_zpsed0822cd.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieSpine_zpsed0822cd.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/ShiningSpine_zps35ed04df.png~original (http://s938.photobucket.com/user/stroppygoblin/media/ShiningSpine_zps35ed04df.png.html)

[WeDealInLead]

Put me down for Doubleday slipcases. Also a slipcase for all four Bachman paperbacks if there is enough interest.

[zelig]

I really like the Castle Rock one. And regarding your point on the larger block increasing costs, I hadn't considered that so I'm okay with the Doubleday being where you have it. Not sure how the rest of the folks feel about it.

[zelig]

Put me down for Doubleday slipcases. Also a slipcase for all four Bachman paperbacks if there is enough interest.

Got it on the Doubleday. For the Bachman, I'd recommend just contacting Jeff direct as he already has blocking for that.

[Roseannebarr]

I don't actually own Dolan's Cadillac, but I'd probably buy the slipcase as I will eventually buy the book.

Does it mean you have a problem when you buy slipcases for books you don't own yet?! Hmmm...

Yes

[jonp]

The Dolan's Cadillac slipcase looks great! Against my better judgement to save money at the moment put me down for three.

[zelig]

The Dolan's Cadillac slipcase looks great! Against my better judgement to save money at the moment put me down for three.

Got it. In terms of quantity, keep in mind that we're consolidating commitments for the cost of the custom blocking only. Once we've got that sorted you'll place your order for the slipcases direct with Jeff. And he'll have all the details he needs on these.

[killjoy72]

Put me down for Doubleday slipcases. Also a slipcase for all four Bachman paperbacks if there is enough interest.

I would be all over that as well.
+1

[killjoy72]

Put me down for Doubleday slipcases. Also a slipcase for all four Bachman paperbacks if there is enough interest.

Got it on the Doubleday. For the Bachman, I'd recommend just contacting Jeff direct as he already has blocking for that.

Whoops! Nevermind...

[webstar1000]

Simon... where is the Dolan's prototype? LOL I keep checking for it. haha

[stroppygoblin]

Simon... where is the Dolan's prototype? LOL I keep checking for it. haha

Post #42 :)

[Randall Flagg]

The Dolans Cadillac could have gray or silver font and the Cadillac the same color. In the book the Cadillac is referred to as gray and silver. The yellow seems off.

[webstar1000]

Here is the mockup for Dolan's...

http://i938.photobucket.com/albums/ad223/stroppygoblin/DolansFront_zps850f07bc.png~original (http://s938.photobucket.com/user/stroppygoblin/media/DolansFront_zps850f07bc.png.html)

SO SORRY! Missed that for some reason! LOVE IT!

[Jimimck]

Carrie and Shining, to scale, look great next to each other. Having a set of these will look excellent on the shelf - well done!

[frik]

*Doubleday
*Castle Rock newsletters
*Dolan's Cadillac

All depending on final price shipped to the Netherlands.

sk

[zelig]

*Doubleday
*Castle Rock newsletters
*Dolan's Cadillac

All depending on final price shipped to the Netherlands.

sk

Got it. Keep in mind, shipping and actual orders for the slipcases will be handled with Jeff directly. What we're doing here is combining resources to bring down the cost of the custom blocking order. It's a one-time cost needed to produce the plates for the printing on the cases.

[bdwyer19]

What is the cost typically to create the custom block?

Sorry if it's been answered already.

[zelig]

What is the cost typically to create the custom block?

Sorry if it's been answered already.

No worries. Check post #1 in the thread.

[stroppygoblin]

The Dolans Cadillac could have gray or silver font and the Cadillac the same color. In the book the Cadillac is referred to as gray and silver. The yellow seems off.

These are just examples. Jeff can do different colours of slipcase and blocking in at least gold, silver and red - probably others on request

[becca69]

I love these...
I would love to take a part in next order of slipcases with someone...

OK - lets get the ball rolling on this....

I have 3 separate slipcase projects I am intending to pursue with Jeff.

1. A slipcase for Dolan's Cadillac S/L (I already have Merlin1958 signed up for one of these)
2. A slipcase to hold all the Castle Rock Newsletters (This has not been mentioned before - anyone else interested?)
3. A set of DoubleDay slipcases. (This one has the most feedback)

For (1) I intend it to be just a stamp on the front (Nothing on the spine as the book already has the spine info). I'd like it to be a picture of the car with "DOLAN'S CADILLAC" above it
http://www.stephenkingcollector.com/pictures/limiteds-sigsheet/Dolan_s_Cadillac_SL_sig1.JPG
Obviously the picture would be far less detailed as it will be just the basic car outline block filled.

For(2) I intend it to be just a stamp on the spine (Nothing on the front) This will be the Castle Rock logo printed vertically and something like "The Stephen King Newsletter Vol 1 - 5"
http://club-stephenking.fr/img/APROPOS/newsletter/castle-rock-newsletter/CastleRock-title.jpg

Now for (3) I am open to suggestions. I'd like something that ties the books together but I cant decide whether the slipcases would be facing in or out on my shelf... I'd also like to have the Book name done in the original font but that's going to mean 1 plate per book (as opposed to something like "Stephen King - The DoubleDay Years" which could be used for all 5 (or even 6 books if you include Pet Semetary)

What does everyone else think - I'd love to see some ideas. Something like these (although slipcase rather than traycase) would be really cool...

http://www.tbclrarebooks.com/pictures/medium/26800.jpg

http://www.tbclrarebooks.com/pictures/32409.jpg

http://www.tbclrarebooks.com/pictures/32143.jpg

http://www.tbclrarebooks.com/pictures/32123.jpg

http://www.tbclrarebooks.com/pictures/31467.jpg

http://i938.photobucket.com/albums/ad223/stroppygoblin/ScreenShot2015-01-06at104842AM_zpsbe00604a.png~original (http://s938.photobucket.com/user/stroppygoblin/media/ScreenShot2015-01-06at104842AM_zpsbe00604a.png.html)

I really love these traycases with the embossed art! Can they be done as slipcases?

[stroppygoblin]

These are not by Jeff (and are *very* expensive)

[Priest]

Put me down for Doubleday slipcases. Also a slipcase for all four Bachman paperbacks if there is enough interest.


Same here - same statement.
If they would be matching (in terms of look) would be great, but even without i am in with the Doubledays project

[Merlin1958]

The Dolan's Cadillac slipcase looks great! Against my better judgement to save money at the moment put me down for three.

Got it. In terms of quantity, keep in mind that we're consolidating commitments for the cost of the custom blocking only. Once we've got that sorted you'll place your order for the slipcases direct with Jeff. And he'll have all the details he needs on these.


Wouldn't it be easier for, Jeff if one complete order was eventually placed rather than him tracking 20-30 individual orders and confirming discounts? Just a thought.

[tippy4]

If the Dolan's Caddy slipcase fits both editions (1/1000 and 1/250), bump me up to two.

[zelig]

Put me down for Doubleday slipcases. Also a slipcase for all four Bachman paperbacks if there is enough interest.


Same here - same statement.
If they would be matching (in terms of look) would be great, but even without i am in with the Doubledays project

I have you down for the Doubleday. For Bachman, I'd recommend you contact Jeff directly as he already has blocking for that.

[zelig]

If the Dolan's Caddy slipcase fits both editions (1/1000 and 1/250), bump me up to two.

I have neither so don't know, but are both the exact same size?

[dnemec]

The Dolan's Cadillac slipcase looks great! Against my better judgement to save money at the moment put me down for three.

Got it. In terms of quantity, keep in mind that we're consolidating commitments for the cost of the custom blocking only. Once we've got that sorted you'll place your order for the slipcases direct with Jeff. And he'll have all the details he needs on these.


Wouldn't it be easier for, Jeff if one complete order was eventually placed rather than him tracking 20-30 individual orders and confirming discounts? Just a thought.

Perhaps we could do another mass order to the US and then parcel out the slipcases (like the umbrella saga). I believe it saved us all some money on shipping costs. Although it was a pain on my end!

[dnemec]

Also, I may be interested in the Castle Rock case. I need to check to see how many issues I have first though.

[stroppygoblin]

The Dolan's Cadillac slipcase looks great! Against my better judgement to save money at the moment put me down for three.

Got it. In terms of quantity, keep in mind that we're consolidating commitments for the cost of the custom blocking only. Once we've got that sorted you'll place your order for the slipcases direct with Jeff. And he'll have all the details he needs on these.


Wouldn't it be easier for, Jeff if one complete order was eventually placed rather than him tracking 20-30 individual orders and confirming discounts? Just a thought.


If the Dolan's Caddy slipcase fits both editions (1/1000 and 1/250), bump me up to two.



If the Dolan's Caddy slipcase fits both editions (1/1000 and 1/250), bump me up to two.

I have neither so don't know, but are both the exact same size?

So, this is the point of contacting Jeff directly. Although we all own the same book, they can vary in size considerably (some may have slightly looser spines and may be covered in Mylar or not. Jeff makes EACH case to the custom size that you specify. What will be common is the block used to stamp the title on the front/AND or Spine. There will be no discounts on slipcases (his prices are pretty reasonable) What we are looking to do is spread the cost of the making of the die blocks. I think we already have enough people to bring the cost of the custom dies down to £1 or £2 on top of the standard slipcase cost (on the Doubleday ones at the very least). The more people that confirm the cheaper the dies will be.

Jeff is used to dealing with multiple orders and shipping overseas, so thats not a problem. It *may* be an option to have a number of slipcases shipped to one US address (and reduce postage costs), but someone else needs to co-ordinate that. I can tell you from experience that the effort in repacking and reshipping is quite large however.

[stroppygoblin]

For those that haven't seen it before, this is the Block for the Bachman Books. Note there is no spine block for this.

http://i938.photobucket.com/albums/ad223/stroppygoblin/6B1211B1-2451-40E8-A18D-B6C9CC019BFF_zps8xkotsiz.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/6B1211B1-2451-40E8-A18D-B6C9CC019BFF_zps8xkotsiz.jpg.html)

[dnemec]

For those that haven't seen it before, this is the Block for the Bachman Books. Note there is no spine block for this.

http://i938.photobucket.com/albums/ad223/stroppygoblin/6B1211B1-2451-40E8-A18D-B6C9CC019BFF_zps8xkotsiz.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/6B1211B1-2451-40E8-A18D-B6C9CC019BFF_zps8xkotsiz.jpg.html)

I bought one of those from Jerome last year. Didn't even know it was Jeff's!

[Jimimck]

I need the books first....

[Priest]

so also for the doubledays we should get in touch with him ? or will somebody orga. a group production ?

[stroppygoblin]

so also for the doubledays we should get in touch with him ? or will somebody orga. a group production ?

EVERYBODY INTERESTED IN SLIPCASES FROM JEFF PLEASE READ!!!

Ok - once more to clarify -

1. This thread is about creating *custom* blocks for printing on slipcases made by Jeff
2. We are gathering names to see who is interested in buying slipcases that would use these custom blocks in order to split the cost of having the blocks made
3. An individual Block will be between £8 and £40 depending on size - this is a ONE OFF COST (The Doubleday slipcases will require 2 blocks)
4. We intend to split the BLOCK cost between all those that want a slipcase that uses the block (If you want more than one, you only pay one share - I think thats fair)
5. Cost for the slipcase is extra, I believe Jeff charges ~ £12.95 depending on size. Shipping is extra and dependent on location (other members have reported this is reasonable to the US)
6. Jeff offers a number of slipcase colours and foil colours, you may choose your own combinations (you can even have COLORS if you are in the US :) )
7. When the designs for the blocks are completed (and everyone is happy) I will send them to Jeff to get an exact cost to have each of the blocks to be made and the cost for the appropriate size slipcase.
8. At this point I will get final confirmation from everyone regarding which case they want and how many. This will allow me to give final costs. If people drop out at this point, I may need to do another round based on the new numbers, hopefully this will not change much.
9. Everyone will then be responsible for contacting Jeff DIRECTLY to order their slipcase colour choices and to provide Jeff with exact measurements of their own book.
10. With the current level of interest, I estimate the cost of each Doubleday case to be around £16 - £20. The other cases will vary as they only have 1 block but less people want them.

I hope that covers everyones questions.

[webstar1000]

I have never paid more than 12.95 for a slipcase Simon. So if I wanted that Dolans... I would chip in for the plate and just buy the case right?

[Randall Flagg]

If the Dolan's Caddy slipcase fits both editions (1/1000 and 1/250), bump me up to two.
It should. Mine are identical in size.

[stroppygoblin]

I have never paid more than 12.95 for a slipcase Simon. So if I wanted that Dolans... I would chip in for the plate and just buy the case right?

Sorry my bad, I went and checked Jeff's previous emails. You are right Kris, £12.95 is the standard price. I have updated my post with adjusted costs.

Jeff will include the proportional cost of the plate in his total price based on the number of people who want one. There will not be 2 separate payments.

[stroppygoblin]

Did another book today..

http://i938.photobucket.com/albums/ad223/stroppygoblin/salemsLotSpine_zpsc68bc31e.png~original (http://s938.photobucket.com/user/stroppygoblin/media/salemsLotSpine_zpsc68bc31e.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/SalemsLotFront_zps41e2f191.png~original (http://s938.photobucket.com/user/stroppygoblin/media/SalemsLotFront_zps41e2f191.png.html)

[stroppygoblin]

The 'shelf view' so far...

http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieSpine_zpsed0822cd.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieSpine_zpsed0822cd.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/salemsLotSpine_zpsc68bc31e.png~original (http://s938.photobucket.com/user/stroppygoblin/media/salemsLotSpine_zpsc68bc31e.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/ShiningSpine_zps948acdd0.png~original (http://s938.photobucket.com/user/stroppygoblin/media/ShiningSpine_zps948acdd0.png.html)

[zelig]

Oh man, makes me want to change my mind and display them with the spine of the case facing out like that. Looking so good.

And I am keeping a spreadsheet of all those who have expressed interest. I will post that when you're ready for it Simon and get final confirmations.

[webstar1000]

I have never paid more than 12.95 for a slipcase Simon. So if I wanted that Dolans... I would chip in for the plate and just buy the case right?

Sorry my bad, I went and checked Jeff's previous emails. You are right Kris, £12.95 is the standard price. I have updated my post with adjusted costs.

Jeff will include the proportional cost of the plate in his total price based on the number of people who want one. There will not be 2 separate payments.
Good thats great brother! Thanks:)

[stroppygoblin]

Next book done

http://i938.photobucket.com/albums/ad223/stroppygoblin/NightShiftSpine_zps2ac90e47.png~original (http://s938.photobucket.com/user/stroppygoblin/media/NightShiftSpine_zps2ac90e47.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/NightShiftFront_zpsc1f66454.png~original (http://s938.photobucket.com/user/stroppygoblin/media/NightShiftFront_zpsc1f66454.png.html)

[stroppygoblin]

One more to go!

http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieSpine_zpsed0822cd.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieSpine_zpsed0822cd.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/salemsLotSpine_zpsc68bc31e.png~original (http://s938.photobucket.com/user/stroppygoblin/media/salemsLotSpine_zpsc68bc31e.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/ShiningSpine_zps948acdd0.png~original (http://s938.photobucket.com/user/stroppygoblin/media/ShiningSpine_zps948acdd0.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/NightShiftSpine_zps2ac90e47.png~original (http://s938.photobucket.com/user/stroppygoblin/media/NightShiftSpine_zps2ac90e47.png.html)

[zelig]

Looking good Simon!

[Br!an]

I like it!

[stroppygoblin]

aaaand the last one is done.

http://i938.photobucket.com/albums/ad223/stroppygoblin/TheStandSpine_zps0a43ea1f.png~original (http://s938.photobucket.com/user/stroppygoblin/media/TheStandSpine_zps0a43ea1f.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/TheStandFront_zps1680c98d.png~original (http://s938.photobucket.com/user/stroppygoblin/media/TheStandFront_zps1680c98d.png.html)

[stroppygoblin]

http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieSpine_zpsed0822cd.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieSpine_zpsed0822cd.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/salemsLotSpine_zpsc68bc31e.png~original (http://s938.photobucket.com/user/stroppygoblin/media/salemsLotSpine_zpsc68bc31e.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/ShiningSpine_zps948acdd0.png~original (http://s938.photobucket.com/user/stroppygoblin/media/ShiningSpine_zps948acdd0.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/NightShiftSpine_zps2ac90e47.png~original (http://s938.photobucket.com/user/stroppygoblin/media/NightShiftSpine_zps2ac90e47.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/TheStandSpine_zps0a43ea1f.png~original (http://s938.photobucket.com/user/stroppygoblin/media/TheStandSpine_zps0a43ea1f.png.html)

[zelig]

Nice Simon! They look delicious!! Amazing work.

[stroppygoblin]

so folks, last chance to make suggestions, changes, etc. Everybody happy with size, alignment, placement? Don't worry about colours, these can be your own choice (limited to what Jeff can provide of course).

[zelig]

Feel free to trash these comments. Just some minor observations.


Looking at the picture of them all side by side, it looks like all of the horizontal lines are the same width. Do you think on the thicker books, they should be made longer so they extend more of the way across the spine? I can't really visualize how that would look.
On 'Salem's, The Shining and The Stand, the book titles extend beyond "Stephen King" above each one. Take a look at Carrie. See how "Carrie" fits within "Stephen King" above it? I realize on the thicker books that's probably why you did it this way, but for consistency, do you think for the three that extend wider, the titles should be made smaller? Or maybe if you implement #1 above, this will be a moot point.


That's it. They look great.

[stroppygoblin]

Feel free to trash these comments. Just some minor observations.


Looking at the picture of them all side by side, it looks like all of the horizontal lines are the same width. Do you think on the thicker books, they should be made longer so they extend more of the way across the spine? I can't really visualize how that would look.
On 'Salem's, The Shining and The Stand, the book titles extend beyond "Stephen King" above each one. Take a look at Carrie. See how "Carrie" fits within "Stephen King" above it? I realize on the thicker books that's probably why you did it this way, but for consistency, do you think for the three that extend wider, the titles should be made smaller? Or maybe if you implement #1 above, this will be a moot point.


That's it. They look great.

Valid points and I had thought about extending the lines. In the end I went with consistency. Obviously Carrie is the thinnest and is the limitation of width. I've tried to keep the book titles approximately the same font size (salems is hard 'cos the two words are completely different size, so i have used the average of the two.

I think if you extend the lines it looks odd as you cannot increase the font size of "Stephen King", "Double Day" and "First Edition" without everything looking mismatched.

This is what it looks like with the book name all the same width:

http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieSpine_zpsed0822cd.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieSpine_zpsed0822cd.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/salemsLotSpine2_zps5d4c0250.png~original (http://s938.photobucket.com/user/stroppygoblin/media/salemsLotSpine2_zps5d4c0250.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/ShiningSpine2_zpsd8fe63cb.png~original (http://s938.photobucket.com/user/stroppygoblin/media/ShiningSpine2_zpsd8fe63cb.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/NightShiftSpine_zps2ac90e47.png~original (http://s938.photobucket.com/user/stroppygoblin/media/NightShiftSpine_zps2ac90e47.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/TheStandSpine2_zpsd6e287da.png~original (http://s938.photobucket.com/user/stroppygoblin/media/TheStandSpine2_zpsd6e287da.png.html)

[zelig]

Let's see what some other opinions are, but here's what I think. I feel that the smaller titles look better for all of them except The Stand. I mean, I do feel it works with the smaller title, but maybe on that one book we make an exception and extend the lines, but keep "Stephen King", "First Edition" and "Doubleday" the same. Don't extend the line under "First Edition", just the top and bottom. Here's the basic idea.

http://i30.photobucket.com/albums/c330/zelig7/the-stand_zps79155e73.jpg

[needfulthings]

Not everybody that will order these will own 1st editions.

[stroppygoblin]

Here's what they all look like extended (and with bigger book name)

http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieSpine_zpsed0822cd.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieSpine_zpsed0822cd.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/salemsLotSpine3_zps88eb531c.png~original (http://s938.photobucket.com/user/stroppygoblin/media/salemsLotSpine3_zps88eb531c.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/ShiningSpine3_zps6fb424b8.png~original (http://s938.photobucket.com/user/stroppygoblin/media/ShiningSpine3_zps6fb424b8.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/NightShiftSpine3_zpsfc339806.png~original (http://s938.photobucket.com/user/stroppygoblin/media/NightShiftSpine3_zpsfc339806.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/TheStandSpine3_zps2a11d0af.png~original (http://s938.photobucket.com/user/stroppygoblin/media/TheStandSpine3_zps2a11d0af.png.html)

[stroppygoblin]

Not everybody that will order these will own 1st editions.

I think I would disagree with that Bruce. Would you spend money on slip-casing a non - 1st edition?

[zelig]

Okay.. I prefer the smaller titles. Basically this version (http://www.thedarktower.org/palaver/showthread.php?18900-Aftermarket-Slipcases-amp-Traycases&p=894616&viewfull=1#post894616). But possibly with The Stand exception. Just my opinion, let's see what you and the others think.

[zelig]

Actually, the more I look at this last version you made, the more I like it... ugh... anyway, let's see what other feedback we receive... I think that top line on The Shining may have been throwing me off as it's a different weight than the others.

[stroppygoblin]

Actually, the more I look at this last version you made, the more I like it... ugh... anyway, let's see what other feedback we receive... I think that top line on The Shining may have been throwing me off as it's a different weight than the others.

Yeah, I fixed that. I'm looking at the version you modded and I like the smaller line under "First Edition" let me do one more pass...

[needfulthings]

Not everybody that will order these will own 1st editions.

I think I would disagree with that Bruce. Would you spend money on slip-casing a non - 1st edition?

I assumed you were trying to sell these as a FULL set of Doubleday slip cases.

[stroppygoblin]

http://i938.photobucket.com/albums/ad223/stroppygoblin/CarrieSpine_zpsed0822cd.png~original (http://s938.photobucket.com/user/stroppygoblin/media/CarrieSpine_zpsed0822cd.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/salemsLotSpine3_zps6b3b6339.png~original (http://s938.photobucket.com/user/stroppygoblin/media/salemsLotSpine3_zps6b3b6339.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/ShiningSpine3_zpsbe5af12a.png~original (http://s938.photobucket.com/user/stroppygoblin/media/ShiningSpine3_zpsbe5af12a.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/NightShiftSpine3_zps05e9687f.png~original (http://s938.photobucket.com/user/stroppygoblin/media/NightShiftSpine3_zps05e9687f.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/TheStandSpine3_zps21a2c692.png~original (http://s938.photobucket.com/user/stroppygoblin/media/TheStandSpine3_zps21a2c692.png.html)

[stroppygoblin]

Not everybody that will order these will own 1st editions.

I think I would disagree with that Bruce. Would you spend money on slip-casing a non - 1st edition?

I assumed you were trying to sell these as a FULL set of Doubleday slip cases.

? Not sure what you mean ? The idea has always been to create something that was specifically designed to house the first 5 books. (ie the 1st editions with the most value). Slipcases exist for some ('salem's and The Stand, but not the others and certainly nothing "uniform")

[zelig]

There you go. I think we have a winner...

[Mr. Rabbit Trick]

aaaand the last one is done.


Now get started on the NEL UK versions!



:)

[burial]

There you go. I think we have a winner...

I think so too. These looks amazing

[Randall Flagg]

Get back to work on the phone app:biggrin:

[stroppygoblin]

Get back to work on the phone app:biggrin:

LOL - What I really should be doing is just getting back to work!!

[Dan]

I agree with Bruce. I was anticipating buying all as a set, but don't have first editions of a couple right now. Not saying "first edition" should be removed, just commenting that people will buy without owning. For me it's just easier to buy them now rather than try and get an exact matching slipcase a year or two down the road.

[WeDealInLead]

Ditto. I still need Carrie but I'll go for the set.

[stroppygoblin]

I agree with Bruce. I was anticipating buying all as a set, but don't have first editions of a couple right now. Not saying "first edition" should be removed, just commenting that people will buy without owning. For me it's just easier to buy them now rather than try and get an exact matching slipcase a year or two down the road.


Ditto. I still need Carrie but I'll go for the set.

Ok I understand now. Jeff sent me a set of sizes that he has for the DD books based on slipcases he has made before. (I'll post these when I'm no longer on a plane!!) members can check their books against these and determine if they need something slightly different. I don't see any issue with buying a full set that have been built to these sizes.

I think the 'First Edition' text should stay - even if you don't have one now, surely that is what you would aspire to eventually put in the case?

[herbertwest]

aaaand the last one is done.

http://i938.photobucket.com/albums/ad223/stroppygoblin/TheStandSpine_zps0a43ea1f.png~original (http://s938.photobucket.com/user/stroppygoblin/media/TheStandSpine_zps0a43ea1f.png.html) http://i938.photobucket.com/albums/ad223/stroppygoblin/TheStandFront_zps1680c98d.png~original (http://s938.photobucket.com/user/stroppygoblin/media/TheStandFront_zps1680c98d.png.html)


Is there a reason why the "THE" of The Stand is not centered?

[Dan]

He's making them appear similar to the first edition covers.

[zelig]

I agree on the First Edition text staying. And regarding the UK editions, that completely slipped my mind. Everything on the artwork will remain the same but just replace "Doubleday" with "New English Library". Was that the initial intention with this project? Or was it to be the US editions only? I think it will require 5 additional blocks to be created. I know I would want a set for both the U.S. and UK editions.

[zelig]

He's making them appear similar to the first edition covers.

Yes, you're right Dan.

[Priest]

I love the latest version - will be very happy with it - but one suggestion


What about a

First edition
========
First printing


i would love to have both infos but thats only my op.

[frik]

In that case I would have to pass. I do have a first edition, but not a first printing.

sk

[zelig]

Yeah, I think we keep it only at "First Edition" only... just my 2c's...

[needfulthings]

Just dump the 1st edition. I am not really into after market slip or tray cases ( The only two I own are MY PRETTY PONY made by the people who made the book & SIX STORIES.) But I have NEVER seen one that said FIRST EDITION. as you can see people will pass on the cases because they do not & will not ever own a full set of these FIRST EDITION books . So why exclude these potential buyers?

[Merlin1958]

Just dump the 1st edition. I am not really into after market slip or tray cases ( The only two I own are MY PRETTY PONY made by the people who made the book & SIX STORIES.) But I have NEVER seen one that said FIRST EDITION. as you can see people will pass on the cases because they do not & will not ever own a full set of these FIRST EDITION books . So why exclude these potential buyers?

Very good point.

[Priest]

any chance to make this an optional detail ? I mean if we can choose the color - would it be possible to give the buyer the chance to choose if s/he wants the editor on it?


Yeah, I think we keep it only at "First Edition" only... just my 2c's...

sure ok for me to

[Randall Flagg]

Never ask for every opinion (and if you do throw 99% out), otherwise the project becomes the result of the lowest common denominator.

[Priest]

just forget my posts above - i will take it as it is ;D

[stroppygoblin]

'First edition' stays. I agree it shouldn't state 1st printing. I stand by my statement that 99% of people who want to pay money for this case will put a first edition in it.

It cannot be made optional, that would require another block to be made.

[zelig]

Yup I agree with all of that. Simon what are your thoughts about the UK editions? I mean having New English Library or NEL for those. Or was this exclusively for the Doubledays.

[stroppygoblin]

Yup I agree with all of that. Simon what are your thoughts about the UK editions? I mean having New English Library or NEL for those. Or was this exclusively for the Doubledays.

My 'plan' if I can call it that, was just the Doubledays. As I mentioned in a previous post, the UK books have quite indistinctive title fonts and rely on the impact of the graphic design. Just changing the publisher name wouldn't make them match the UK books.

In addition, there are considerably fewer people that have a set of UK 1sts, mainly due to the smaller print run. I don't know if we would get the same level of buy in for these.

I think we should get this 1st set out of the door and then gauge interest in other books or UK versions

[zelig]

Okay that all makes sense. I didn't even consider the different fonts on the UK's.

[tippy4]

I am in the camp of those that think First Edition should be dumped.....I just do not see the point.

I have never seen a slipcase for a King title that says that...why start now?

Those that own the book will know if their book is a first edition (assuming it is), they do not need to be told that.

And as previously mentioned, there might be those that have a book that is not a first edition that will want a slipcase.

[stroppygoblin]

I have never seen a slipcase for a King title that says that...why start now?


...see post #11...

[zelig]

Here's the list of everyone who said they wanted to be included. Let me know if I've missed anyone.

Dolan's


AKC (x2)
burial
dnemec
frik
jonp (x3)
killjoy72
Merlin1958
Roseannebarr
Sentinel
stroppygoblin
tippy4
webstar1000
zelig


Castle Rock


burial
frik
killjoy72
Roseannebarr
Sentinel
stroppygoblin
zelig


Doubleday


AKC
burial
Dan
frik
Jimimck
killjoy72
Priest
Roseannebarr
Sentinel
stroppygoblin
WeDealInLead
zelig

[brionen]

I had been on the fence, but after seeing the mock-ups for the Doubleday slipcases, I'm willing to pitch in on the cost of the plates. Please add me to the Doubleday list.

For what it's worth, I'm fine with seeing First Edition on the spines. Most of mine aren't currently 1st Edition/1st printings, but they are all 1st editions from a content and sizing standpoint, based on the more general definition of the term.

[killjoy72]

I'm only interested in the Doubleday slipcases, not the others.

[zelig]

I had been on the fence, but after seeing the mock-ups for the Doubleday slipcases, I'm willing to pitch in on the cost of the plates. Please add me to the Doubleday list.

Got it.


I'm only interested in the Doubleday slipcases, not the others.

Got it.

[burial]

well... I've run through my Castle Rock newsletter... and... oh my god... i don't have even a half of these... and wasn't aware that i'm missing that much
So... for now - cross me of the list for the slipcase for Castle Rock

[Merlin1958]

When can I order my "Dolan's Cadillac" case!!!! I'm dying here!!! LOL LOL


This is a great project!!! Thanks to all involved!!

[needfulthings]

The Castle Rock case is this for Just the first 5 issues or the entire run?

[Br!an]

The Castle Rock case is this for Just the first 5 issues or the entire run?

If for the entire run are we just supposed to stack them up and slide them in the slipcase?

I have mine in sleeves that are contained in two binders. I don't see a slipcase being as safe or slipcased copies being as easy to access.

[stroppygoblin]

The Castle Rock case is this for Just the first 5 issues or the entire run?



The Castle Rock case is this for Just the first 5 issues or the entire run?

If for the entire run are we just supposed to stack them up and slide them in the slipcase?

I have mine in sleeves that are contained in two binders. I don't see a slipcase being as safe or slipcased copies being as easy to access.

I had intended the entire run - hence the dates at at the bottom of the spine. This is (I believe) 54 issues for a full set. All of mine are single folded and stored in a archival bag. I reckon on a case approximately 2" thick to hold them all (I haven't actually measured this precisely yet.

So once again - this thread is just about the blocking to be printed. If you want a case wider or thinner or to hold the issues unfolded (that would be big!) then you can specify your requirements to Jeff. Please bear in mind that there will be a minimum thickness to allow the blocking to be printed on the spine.

[zelig]

well... I've run through my Castle Rock newsletter... and... oh my god... i don't have even a half of these... and wasn't aware that i'm missing that much
So... for now - cross me of the list for the slipcase for Castle Rock

Done


When can I order my "Dolan's Cadillac" case!!!! I'm dying here!!! LOL LOL


This is a great project!!! Thanks to all involved!!

Thanks Bill! BTW I don't even have DC. Just ordering the case before the book so when I get the book, I have the case! Doing it backwards...

[Merlin1958]

I was just kidding. Though I can't wait to get my case!!! LOL

[needfulthings]

I think these really need a TRAYCASE!
http://imageshack.com/a/img661/7380/SW0DFC.jpg

[stroppygoblin]

I think these really need a TRAYCASE!
http://imageshack.com/a/img661/7380/SW0DFC.jpg

Hmm mine seem thinner than this - maybe they are more compressed...

Jeff doesn't do tray cases. I suppose we could split them over 2 slip cases, but that's going to double the cost....

[zelig]

My complete set measures about 4 inches but I do have each one in a plastic sleeve. If we do 2 cases, it won't double the cost (of the plates) if you leave off the years and just have the logo. Just a thought.

Here's the updated list with latest change requests/additions:

Dolan's


AKC (x2)
burial
dnemec
frik
jonp (x3)
Merlin1958
Roseannebarr
Sentinel
stroppygoblin
tippy4 (x2)
webstar1000
zelig


Castle Rock


frik
Roseannebarr
Sentinel
stroppygoblin
zelig


Doubleday


AKC
burial
Dan
frik
Jimimck
killjoy72
Priest
Roseannebarr
Sentinel
stroppygoblin
WeDealInLead
zelig

[stroppygoblin]

I suppose both could have the full years on them... but I take your point.

UPDATE:

I have been in contact with Jeff and he is waiting on receiving a full set of artwork for one of the books so he can check quality and font sizes, etc. This will enable him to get a more accurate final price. Unfortunately I am the person who is slowing this down right now as I have just got back from the US this morning and I fly to Germany at 7:00am tomorrow for 2 days...

I'll endeavor to get polished artwork to Jeff over the weekend and keep everyone updated.

[Jimimck]

Stroppy, no rush pal, you are doing a great job here and we appreciate the effort.

Cheers

[zelig]

Stroppy, no rush pal, you are doing a great job here and we appreciate the effort.

Cheers

Yup... well said... your efforts are certainly appreciated Simon.. :smile:

[Merlin1958]

Stroppy, no rush pal, you are doing a great job here and we appreciate the effort.

Cheers



Stroppy, no rush pal, you are doing a great job here and we appreciate the effort.

Cheers

Yup... well said... your efforts are certainly appreciated Simon.. :smile:

Same here, my Brutha!!!

[stroppygoblin]

Jeff has mocked up the case for Carrie! he is kindly going to get this one made up properly for approval before we go full on with the others. I'll post more pictures as I get them.

http://i938.photobucket.com/albums/ad223/stroppygoblin/p1010136_zpsb5667d60.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/p1010136_zpsb5667d60.jpg.html)

[webstar1000]

Black cases? What color on the words? Each diff?

[stroppygoblin]

Black cases? What color on the words? Each diff?

The prototype will be done as a black case with gold lettering. Jeff should be able to provide different colour combinations for those that want them.

[zelig]

Looking good... nice to see this all coming together...

[Jimimck]

Well there is my incentive to complete my first edition collection!

[stroppygoblin]

Here are some pictures of the finished Carrie slipcase.
Watch this space for final details on pricing.

http://i938.photobucket.com/albums/ad223/stroppygoblin/019F15FD-B01B-4C82-A392-317706B6812F_zpsfodwtvol.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/019F15FD-B01B-4C82-A392-317706B6812F_zpsfodwtvol.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/97AC2D90-450F-4B29-9AC4-3BF568044E82_zpspqtaqo5p.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/97AC2D90-450F-4B29-9AC4-3BF568044E82_zpspqtaqo5p.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/C8C1DA1F-2866-46BE-8983-6AE2CBD5B862_zpsiaqmvxsw.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/C8C1DA1F-2866-46BE-8983-6AE2CBD5B862_zpsiaqmvxsw.jpg.html)

I think Jeff did an incredible job on this!

[zelig]

Nice! looks really sharp. They will look so good all together...

[webstar1000]

Nice!

[jonp]

Yes, that's an incredible job. I just wish I had the books that went in them, otherwise I would be all over those.

[killjoy72]

Hey now stroppygoblin, don't be modest! You had a hand in this too. Incredible job indeed!:clap:

[stroppygoblin]

OK people, I have just heard back from Jeff and due to the number of people who have committed to these cases, he is covering the cost of the plates. This means that each case is the incredible price of £12.95 plus postage!!!

I have already paid him for the 1st Carrie case as he wants me to double check for size and fit. After that is done, he will start work on the other slip cases including Dolan's. For now I am holding off on the Castle Rock Newsletter one until we get a consensus of size and whether one or two slipcases is the right way to go.

Can everyone who expressed an interest in either the Doubleday slipcases or the Dolan's please PM Zelig and confirm you wish to place an order. I will double check postage costs to the US, but I believe there are members here that have had cases shipped from Jeff in the past and maybe able to provide estimates in the meantime.

Also if you were on the fence awaiting final costs and would like any of these cases, please PM Zelig to be added to the list.

[burial]

great news :)
I want to clarify - do we have to order these cases one-by-one (+separate shipping for every each of them) or can we order for example order 3 different in one order-one shipping?
Can you also check European shipping (Poland for me)?
thank you

[Lot guy]

Please add me for Dolan's & the Doubleday. Will that white/grey Carrie also be available it only black?

[stroppygoblin]

great news :)
I want to clarify - do we have to order these cases one-by-one (+separate shipping for every each of them) or can we order for example order 3 different in one order-one shipping?
Can you also check European shipping (Poland for me)?
thank you

Spoke with Jeff again today. He and I are going to double check sizes with my books before he starts fulfilling other people's orders. If you order all slipcases they will be shipped as one single shipment. I'll have to get back to you on shipping costs to Poland.


Please add me for Dolan's & the Doubleday. Will that white/grey Carrie also be available it only black?

That "white/grey" is a mockup where Jeff has printed the design I sent on paper to size and wrapped around an in fished case. If you want I can send you the PDF and you could do the same... :)

Jeff offers a range of case colours and block colour - just let him know you want something other than gold/black.

IMPORTANT! There is no need to contact Jeff yet, he wants to get all the blocks and a test slipcase done for all the books before he starts taking orders. I'm just looking for confirmation from everyone now the price is known.

[zelig]

What's up guys... I got a number of PM's yesterday and haven't had a chance to respond yet.

Simon: Can you please clarify. I was under the impression orders would be placed direct with Jeff (when he's ready). What was the reason for folks to PM me? I already have a list of who has expressed interest previously. If you can clarify this, I'll do whatever is needed to assist. Thanks!!

[stroppygoblin]

Yes, everyone ignore the PM thing. If your name is on the list in this thread then I am assuming you are happy with the price and shipping. As soon as Jeff has done all the plates and I have checked sizes then I'll let everyone know they can place their orders direct with him.

I'd like to do a check on book sizes if one or two of you could measure their copies and compare against the sizes below. See photo as to how to measure accurately.

Salems
H 217mm
W 38mm
D 153mm
Front 157mm Spine 44mm

The Stand
H 217mm
W 60mm
D 151mm
Front 155mm Spine 66mm

Night Shift
H 217mm
W 32mm
D 145mm
Front 149mm Spine 44mm

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010130_zps7dhk7vlv.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010130_zps7dhk7vlv.jpg.html)

[zelig]

This is the latest list I have:

Here's the list of everyone who said they wanted to be included. Let me know if I've missed anyone.

Dolan's


AKC (x2)
burial
dnemec
frik
jonp (x3)
Lot guy
Merlin1958
Roseannebarr
Sentinel
stroppygoblin
tippy4 (x2)
webstar1000
zelig


Castle Rock


frik
Phalucha
Roseannebarr
Sentinel
stroppygoblin
zelig


Doubleday


AKC
brionen
burial
Dan
frik
Jimimck
killjoy72
Lot guy
Phalucha
Priest
Roseannebarr
Sentinel
stroppygoblin
WeDealInLead
zelig

[Merlin1958]

Yes, everyone ignore the PM thing. If your name is on the list in this thread then I am assuming you are happy with the price and shipping. As soon as Jeff has done all the plates and I have checked sizes then I'll let everyone know they can place their orders direct with him.

I'd like to do a check on book sizes if one or two of you could measure their copies and compare against the sizes below. See photo as to how to measure accurately.

Salems
H 217mm
W 38mm
D 153mm
Front 157mm Spine 44mm

The Stand
H 217mm
W 60mm
D 151mm
Front 155mm Spine 66mm

Night Shift
H 217mm
W 32mm
D 145mm
Front 149mm Spine 44mm

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010130_zps7dhk7vlv.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010130_zps7dhk7vlv.jpg.html)

Boy, some "Consigliere" you are!!! LOL Good thing you are a civilian and not involved with the "Muscle" end of the family!! LOL

[Priest]

hey guys,
how do you want the color for the doubledays ? RGB , Hex , pantone ?

Cheers and thanks for the great project!

[stroppygoblin]

hey guys,
how do you want the color for the doubledays ? RGB , Hex , pantone ?

Cheers and thanks for the great project!

I presume you mean slipcase colour? Jeff has a selection of colours, but I don't think you will be able to specify an exact colour match.

[Priest]

ok - nevermind - can you give us the specs for that ?
i have a different project running and want them to macht - so it would be great to get the colors

Thanks!

[stroppygoblin]

ok - nevermind - can you give us the specs for that ?
i have a different project running and want them to macht - so it would be great to get the colors

Thanks!

You will need to contact Jeff directly and see what colours he can provide. All orders for these cases will go direct to Jeff as and when the full set is available and checked for size, etc. We are probably a few weeks away from that still.

(I'm starting to understand the amount of effort Brian at CD puts in... :) )

[stroppygoblin]

So I now have the first Carrie slipcase in hand. Book fits perfectly! I was really nervous about how the spine would look on this one due to how thin the book is and even though it looked ok on paper and in the photos that Jeff had sent, I wasn't 100% ok till I saw it with my own eyes. It's perfect, the font size is extremely legible and very clear, it's not 'blocky' in any way. The fit of the slipcase is perfect, not too tight but with enough 'grip' on the book to prevent it slipping out. There is approx 1-2mm gap at the top which makes getting the book in and out very easy. Another quality piece of work from Jeff.

http://i938.photobucket.com/albums/ad223/stroppygoblin/EA4A39AE-E1E0-4EDA-B004-C526E8EAD744_zpsmlr7zh29.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/EA4A39AE-E1E0-4EDA-B004-C526E8EAD744_zpsmlr7zh29.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/FB2E1FAF-E7C1-4162-B1CA-572ABA1C2BD2_zps50guqqum.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/FB2E1FAF-E7C1-4162-B1CA-572ABA1C2BD2_zps50guqqum.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/E468252D-40F4-4AA5-9301-21D834B53EB0_zpsr65ksnyb.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/E468252D-40F4-4AA5-9301-21D834B53EB0_zpsr65ksnyb.jpg.html)

The first of many.... :thumbsup:
http://i938.photobucket.com/albums/ad223/stroppygoblin/BC1E50DE-A40C-42A4-9B7A-5273256F127C_zpslgdxlrbu.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/BC1E50DE-A40C-42A4-9B7A-5273256F127C_zpslgdxlrbu.jpg.html)

[jonp]

Very Nice. :drool:

[burial]

wow... awesome...
I think that owning these slipcases will force me to buy these books finally :)

[killjoy72]

Yep, gonna look real slick once they're all done and together on the shelf. Can't wait!!

[zelig]

Looks great!

[frik]

Love what I see. Can't wait to have these on my shelf!

sk

[ELazansky]

I know this has probably been mentioned in the thread, but will Jeff be taking orders directly if we want just one or two cases? I only really need one for Night Shift and on for The Shining.

[killjoy72]

I know this has probably been mentioned in the thread, but will Jeff be taking orders directly if we want just one or two cases? I only really need one for Night Shift and on for The Shining.

Yes. The rest of the plates still need to be made for the other books (plus individual mock-ups to be made, I'm sure). Once they're all done that's when we order with our color/quantity preferences from Jeff.

[Aronstg]

Do we have an estimate on how much it would cost to ship all of the doubleday cases to the USA at once?

[stroppygoblin]

Do we have an estimate on how much it would cost to ship all of the doubleday cases to the USA at once?

Can anyone in the US who has had cases shipped previously answer this? If not I will ask Jeff for an estimate

[frik]

From where will the cases be shipped?

sk


Found it: the UK.
Great, as I'm from the European continent.

[stroppygoblin]

I asked Jeff about shipping the set to the U.S. and this was his response:

This is just a guess but probably accurate based on other packages recently sent to the states, £15.55 or £18.25 obviously when the first five are done I will weigh and give a totally accurate price.

Sounds pretty reasonable to me!

[OneFathom]

Anyone happen to know where I can find those clear, hard plastic cases I've seen books sometimes displayed in on this site. They're about the size of a slipcase, but made of heavy-duty clear plastic. Acrylic, maybe?

[stroppygoblin]

Anyone happen to know where I can find those clear, hard plastic cases I've seen books sometimes displayed in on this site. They're about the size of a slipcase, but made of heavy-duty clear plastic. Acrylic, maybe?

George Beahm had some commissioned for the large version of 'Knowing Darkness' (a couple of his other works have had acrylic slipcases too). There was a link on another thread for an alternative supplier but not sure how small they go.

[dnemec]

Anyone happen to know where I can find those clear, hard plastic cases I've seen books sometimes displayed in on this site. They're about the size of a slipcase, but made of heavy-duty clear plastic. Acrylic, maybe?

George Beahm had some commissioned for the large version of 'Knowing Darkness' (a couple of his other works have had acrylic slipcases too). There was a link on another thread for an alternative supplier but not sure how small they go.

I bookmarked it from whomever had mentioned it before. Here it is.

Acrylic Cases (http://www.casesforcollectibles.com/1602.html)

[stroppygoblin]

UPDATE:

All remaining artwork for the next 4 Doubleday books plus the artwork for Dolan's Cadillac has now been checked and sent to Jeff. He will do mockups (like the one for Carrie) to do a final check on size and positioning and then the artwork will be sent off to the plate manufacturer. Once they come back, Jeff will create one slipcase of each and send to me for final checks. After that you are free to place your orders!

[stroppygoblin]

Oh and the Castle Rock Newsletter case. I'm open to discussion on how to proceed with this based on the fact that they will not fit in one case and the interest is smaller. If we did two cases with the same plate, that would keep the cost down. If however the majority would like to differentiate (years 1 & 2 and years 3 & 4 maybe?) then two plates would need to be made.

Interested in peoples views on this.

EDIT: I think I have mentioned it before, but it bears repeating, Jeff ONLY manufactures slipcases, he does NOT make tray cases.

[zelig]

For the Castle Rock slipcases, I don't mind the same plate for both slipcases. So we don't need separate plates for the series of years... Just my opinion.

[killjoy72]

UPDATE:

All remaining artwork for the next 4 Doubleday books plus the artwork for Dolan's Cadillac has now been checked and sent to Jeff. He will do mockups (like the one for Carrie) to do a final check on size and positioning and then the artwork will be sent off to the plate manufacturer. Once they come back, Jeff will create one slipcase of each and send to me for final checks. After that you are free to place your orders!

Woohoo!

[ke7285]

The slipcase's look great!!! Is it too late to get in on this deal? I would be in for the doubleday's and the Dolan's Cadillac.
Thank's Kevin

[stroppygoblin]

The slipcase's look great!!! Is it too late to get in on this deal? I would be in for the doubleday's and the Dolan's Cadillac.
Thank's Kevin

Not too late at all, we will add you to the list!

[Roseannebarr]

UPDATE:

All remaining artwork for the next 4 Doubleday books plus the artwork for Dolan's Cadillac has now been checked and sent to Jeff. He will do mockups (like the one for Carrie) to do a final check on size and positioning and then the artwork will be sent off to the plate manufacturer. Once they come back, Jeff will create one slipcase of each and send to me for final checks. After that you are free to place your orders!

Woohoo!

Are we talking days? Weeks? months? just curious of the time frame. just dropped a load of money buying signed copies of revival!

[zelig]

The slipcase's look great!!! Is it too late to get in on this deal? I would be in for the doubleday's and the Dolan's Cadillac.
Thank's Kevin

Not too late at all, we will add you to the list!

I've added you to the spreadsheet.

[killjoy72]

UPDATE:

All remaining artwork for the next 4 Doubleday books plus the artwork for Dolan's Cadillac has now been checked and sent to Jeff. He will do mockups (like the one for Carrie) to do a final check on size and positioning and then the artwork will be sent off to the plate manufacturer. Once they come back, Jeff will create one slipcase of each and send to me for final checks. After that you are free to place your orders!

Woohoo!

Are we talking days? Weeks? months? just curious of the time frame. just dropped a load of money buying signed copies of revival!

Oh jeez, just rub it in...:tongue:

[needfulthings]

Are we talking days? Weeks? months? just curious of the time frame. just dropped a load of money buying signed copies of revival!
:cry::cry::cry::cry::cry::cry:...:lol::lol::lol::l ol:

[Merlin1958]

UPDATE:

All remaining artwork for the next 4 Doubleday books plus the artwork for Dolan's Cadillac has now been checked and sent to Jeff. He will do mockups (like the one for Carrie) to do a final check on size and positioning and then the artwork will be sent off to the plate manufacturer. Once they come back, Jeff will create one slipcase of each and send to me for final checks. After that you are free to place your orders!

Woohoo!

Are we talking days? Weeks? months? just curious of the time frame. just dropped a load of money buying signed copies of revival!

Oh jeez, just rub it in...:tongue:

Nah, don't worry. You don't want to buy one of his copies. He probably laid them all out on the hotel bed and then rolled around on them naked like he was, Scrooge McDuck on a bed of hundred dollar bills!!! :wtf::wtf::wtf:

[stroppygoblin]

UPDATE:

All remaining artwork for the next 4 Doubleday books plus the artwork for Dolan's Cadillac has now been checked and sent to Jeff. He will do mockups (like the one for Carrie) to do a final check on size and positioning and then the artwork will be sent off to the plate manufacturer. Once they come back, Jeff will create one slipcase of each and send to me for final checks. After that you are free to place your orders!

Woohoo!

Are we talking days? Weeks? months? just curious of the time frame. just dropped a load of money buying signed copies of revival!

For Carrie, the time frame from Jeff receiving the artwork to producing a finished case was 4 days! :panic:
I would expect a couple of weeks for all to be done.

[ke7285]

The slipcase's look great!!! Is it too late to get in on this deal? I would be in for the doubleday's and the Dolan's Cadillac.
Thank's Kevin

Not too late at all, we will add you to the list!

I've added you to the spreadsheet.

Thank you for the great job you both are doing!

[jsweet]

The slipcase's look great!!! Is it too late to get in on this deal? I would be in for the doubleday's and the Dolan's Cadillac.
Thank's Kevin

Not too late at all, we will add you to the list!

I've added you to the spreadsheet.

Please add me as well for the Doubleday cases. Latecomer to the forum, but very interested! Thanks!

[stroppygoblin]

For those (like me) that are interested in what the plates look like or the process involved in making these slipcases, Jeff provided me with some photo's...

Some existing plates and the new Carrie one.
http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010157_zpsjd7qjsbh.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010157_zpsjd7qjsbh.jpg.html)

The plate on the press
http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010162_zpszjbgvquh.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010162_zpszjbgvquh.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010160_zpsyxqedwz0.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010160_zpsyxqedwz0.jpg.html)

The resulting slipcase cover waiting to be glued to the slipcase.
http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010163_zpswjsmawqz.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010163_zpswjsmawqz.jpg.html)

This is why Jeff and I have checked the measurements over and over as it has to wrap (and centre on two sides) perfectly. Although all the books are the same height, each spine width is different and there are differences in the book widths as well....

[killjoy72]

Fascinating!

[zelig]

Yeah, very interesting.

[ke7285]

Great, and some people wonder about cost???, alot of work involved that is why we let the pro's do the work.

[idlewarnings]

Great photos. Thanks for sharing.

[Merlin1958]

Great photos. Thanks for sharing.

Ditto!!!

[Jay127]

I'm in on all the Doubleday slipcases.

[zelig]

I'm in on all the Doubleday slipcases.

I added you to the list.... although Simon correct me if I'm wrong, but I don't believe we need to track this list anymore, since Jeff is absorbing the cost of the blocking. Or did I misunderstand that part...

[stroppygoblin]

I'm in on all the Doubleday slipcases.

I added you to the list.... although Simon correct me if I'm wrong, but I don't believe we need to track this list anymore, since Jeff is absorbing the cost of the blocking. Or did I misunderstand that part...

Yes and no. Jeff is absorbing the cost BECAUSE of the large number of people who have committed, so it's good to keep a track. But I think we have more than enough people interested that if one or two members decide not to order it would not affect Jeff's costs (not that I expect anyone to back out now).

[stroppygoblin]

I'm in on all the Doubleday slipcases.

I should be in sales :)

Oh wait I am... :evil:

[zelig]

I'm in on all the Doubleday slipcases.

I added you to the list.... although Simon correct me if I'm wrong, but I don't believe we need to track this list anymore, since Jeff is absorbing the cost of the blocking. Or did I misunderstand that part...

Yes and no. Jeff is absorbing the cost BECAUSE of the large number of people who have committed, so it's good to keep a track. But I think we have more than enough people interested that if one or two members decide not to order it would not affect Jeff's costs (not that I expect anyone to back out now).

Okay, will continue to keep track then...

[stroppygoblin]

Just received an update from Jeff. He's still working on the the other Doubleday's but has completed the Case for Dolan's. I am *really* happy with this one :)

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010186_zpsaj83ouv1.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010186_zpsaj83ouv1.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010182_zps81hdcoet.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010182_zps81hdcoet.jpg.html)

[ke7285]

That is very nice!!!

[webstar1000]

When can we order?!!?! Love the Dolans!

[killjoy72]

Yeah that Dolan's looks killer! Makes me wish I actually owned a copy to put it in.

[zelig]

Looks really sharp!

[stroppygoblin]

When can we order?!!?! Love the Dolans!

soon... need to check final fit on this and the others and then should be good to go. maybe 1 more week?

[webstar1000]

Great!

[AstroDad]

I'm tempted to get this set as well, although I only recently ordered a copy of The Stand and have none of the other Doubleday books :)

Other than ordering a Dolso case, is anyone aware of a traycase option for The Stand?

[zelig]

I'm tempted to get this set as well, although I only recently ordered a copy of The Stand and have none of the other Doubleday books :)

Other than ordering a Dolso case, is anyone aware of a traycase option for The Stand?

You could always order them now for when you do eventually get the others. Or just hold off until you have them because the plates will have been made and you can place the order then. You'd order direct from Jeff.

In terms of a traycase for The Stand, the one I'm aware of is this one (http://www.stephenkingcollector.com/standvariant.html), but it's no longer available for sale. Basically sold out. You'd have to try find one on the secondary market.

[burial]

My "Dolan's Cadillac" misses it's slipcase :)

[jonp]

Just received an update from Jeff. He's still working on the the other Doubleday's but has completed the Case for Dolan's. I am *really* happy with this one :)

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010186_zpsaj83ouv1.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010186_zpsaj83ouv1.jpg.html)

http://i938.photobucket.com/albums/ad223/stroppygoblin/P1010182_zps81hdcoet.jpg~original (http://s938.photobucket.com/user/stroppygoblin/media/P1010182_zps81hdcoet.jpg.html)

Nice. Just need to decide which colours are best. But it looks very nice as in the photos above.

[stroppygoblin]

The 1000 limited edition is black and gold on the spine, so for me this is a perfect match.

I liked RF's ideas around the grey and silver however and think it would work well for the more limited version

[jonp]

The 1000 limited edition is black and gold on the spine, so for me this is a perfect match.

I liked RF's ideas around the grey and silver however and think it would work well for the more limited version

The one shown would work well with my 1000 limited edition and my presentation copy of the 1000. I will have to check the appearance of the 250 copy. I remember it being a bluey marbled appearance. I should check the catalogue - it's my friend! I would like that one to be different!

[frik]

I LOVE the Dolan's Cadillac case.

sk

[jonp]

Totally wrong - 250 copy is a grey marbled appearance, the lettered is blue!

[Mr. Rabbit Trick]

Totally wrong - 250 copy is a grey marbled appearance, the lettered is blue!

You got that right.

http://www.akyle.f2s.com/images/dolans.jpg

[Room 217 Caretaker]

Great picture showing them side by side.

I know this is the wrong thread and I didn't want to copy your picture over to the other thread....what is your value opinion of each? I need to update my database and these don't come up that often.

Mulleins

[webstar1000]

The black marble has a slipcase does it not? Or at least mine does...

[Room 217 Caretaker]

The black marble has a slipcase does it not? Or at least mine does...

Mine does. I always wondered if it was after market.

Mulleins

[jonp]

I think only the lettered had a slipcase. My 250 copy does not have one.

[Mr. Rabbit Trick]

....what is your value opinion of each? I need to update my database and these don't come up that often.

Mulleins

Betts prices:

Lettered - $2,500 (only one)
250 S/L - $450 (average)
1000 S/L - $350 (average)

[webstar1000]

....what is your value opinion of each? I need to update my database and these don't come up that often.

Mulleins

Betts prices:

Lettered - $2,500 (only one)
250 S/L - $450 (average)
1000 S/L - $350 (average)

Your black have a black slipcase Alan?

[Mr. Rabbit Trick]

One of mine came with a slipcase, but I can't remember which one. My others have matching aftermarket slipcases made by Jeff.

[carlosdetweiller]

jonp is correct. Only the lettered was published by Lord John Press with a slipcase.

Someone several years ago (I think it may have been Camelot Books) commissioned and sold black slipcases for the other editions and they sold very well. Many now have aftermarket slipcases.

[webstar1000]

jonp is correct. Only the lettered was published by Lord John Press with a slipcase.

Someone several years ago (I think it may have been Camelot Books) commissioned and sold black slipcases for the other editions and they sold very well. Many now have aftermarket slipcases.
It is a very well made case for sure.

[surly]

jonp is correct. Only the lettered was published by Lord John Press with a slipcase.

Someone several years ago (I think it may have been Camelot Books) commissioned and sold black slipcases for the other editions and they sold very well. Many now have aftermarket slipcases.

Wow, I had no idea. The 250 edition was one of the first S/Ls I bought on the secondary market, oh so many years ago, and I've always just assumed it was issued that way.
Always learning new things here.

[Merlin1958]

Can't wait to order mine!!! It looks fabulous!!!